mariobbhr966.brightpathdigest.com

Picking a Custom Driveline Store: Evaluation, Balance, Custom U Bolts, and Repair Considerations for Work Trucks

Business Name: Anderson Brothers Truck & Equipment
Address: 2640 State Hwy 99 N #1, Eugene, OR 97402
Phone: (541) 688-8686

Anderson Brothers Truck & Equipment

Anderson Brothers Truck & Equipment is a long-established truck parts and repair company located in Eugene, Oregon. Founded in 1949, the business has served the region for more than 70 years, building a reputation as a reliable source for heavy-duty truck parts, custom fabrication, and equipment repair. The company works with commercial vehicle owners, fleets, and equipment operators who need dependable parts and services to keep their trucks operating safely and efficiently.

A core focus of Anderson Brothers is providing specialized services for heavy-duty trucks and equipment. Their shop offers custom driveline fabrication and repair, helping customers build, rebuild, or balance drivelines for a wide range of applications. They also specialize in custom U-bolt bending and fabrication, producing precisely sized components for trucks and other heavy equipment. In addition, the company sells both new and used truck parts, stocking a large inventory and offering local delivery in the Eugene and Springfield areas.

Beyond parts sales, Anderson Brothers provides repair and maintenance services for truck components such as transmissions, differentials, and related systems. Their experienced team focuses on delivering practical, cost-effective solutions that help keep trucks and equipment running reliably. With decades of experience and a commitment to local service, Anderson Brothers Truck & Equipment continues to support the trucking and transportation industries throughout Eugene and surrounding communities.

View on Google Maps
2640 State Hwy 99 N #1, Eugene, OR 97402
Business Hours
  • Monday: 7:30 AM–6 PM
  • Tuesday: 7:30 AM–6 PM
  • Wednesday: 7:30 AM–6 PM
  • Thursday: 7:30 AM–6 PM
  • Friday: 7:30 AM–6 PM
  • Saturday: 8 AM–2 PM
  • Sunday: Closed
  • Follow Us:
  • Facebook: https://www.facebook.com/andersonbrotherseugene
  • Instagram: https://www.instagram.com/andersonbrotherste/


    Work trucks make their keep under load, not on stands. When vibration begins sneaking in at 45 to 55 miles per hour, when a center carrier groans on takeoff, or a yoke slings grease and dust like confetti, productivity falls off a cliff. A great driveline store keeps your iron moving. The distinction between a capable store and a reckless one is the distinction in between a week of callbacks and a year of quiet miles. If you spec and service fleets, or you run a single-ton dump that has to start every cold early morning in January, you care about who touches your driveline.

    This guide concentrates on evaluation, balance, Custom U Bolts, and repair choices with the truths of work trucks in mind. The details matter. Drivelines live in a geometry problem that changes with every load, every suspension tweak, and every worn bushing. The right store comprehends that and behaves accordingly.

    What quality looks like in a driveline shop

    The best driveline attires are part machine shop, part diagnostic laboratory. They measure two times, file angles, and ask concerns about how the truck really works. A reputable shop is neat where it counts. Their balancers are clean and kept, their V-blocks are true, and you can see old shafts tagged by customer and condition. You will see yoke protectors on completed pieces, labels on tubing sizes, and a rack of weld yokes and slip stubs that cover the common service classes from light-duty half tons to Class 7 and 8.

    Staff is the biggest inform. If the counter person requests operating angles and wheelbase rather than just a VIN, you are in good hands. If a tech strolls the truck with you, takes a look at axle wrap evidence on the springs, and keeps in mind a dented tube half-hidden by an exhaust heat guard, better still. I rely on shops that can discuss why a double cardan was chosen for a raised service body F-350, and why a long single-piece may be the better path for a Class 6 box truck with a low ride height and a long wheelbase. There are compromises, and they will state them out loud.

    The stakes for work trucks

    A buzzing driveline is more than a comfort problem. Vibration chews through u-joints and pinion seals, loosens up fasteners, and fatigues tubes. On multi-piece drivelines, a failing center assistance bearing can turn a simple service see into a crossmember and floor repair if it releases at speed. Downtime costs rapidly accumulate: one day off a job for a bucket truck or a dump can cost numerous thousand dollars between lost billable hours and rescheduling. Spend a bit more up front on a shop that inspects properly, and you redeem quiet, safe miles and fewer roadside headaches.

    Inspection that goes beyond the bench

    You can identify quite a bit before you ever pull the shaft. First, a road test informs the speed at which the vibration appears, which hints at whether it is first-order driveshaft speed, tire speed, or an engine harmonic. If the vibration can be found in constant at a particular mph across all gears, it frequently points at the shaft. If it comes and goes with throttle input, look at pinion angle modifications and u-joint brinelling.

    Under the truck, look for witness marks. Intense rings at the u-joint caps suggest spinning caps due to loose straps or incorrectly sized bearing caps. Rust dust at the cups is a giveaway for dry joints. A damp band around the tube a foot from the weld can conceal a slight dent that altered wall thickness, which will toss balance off even if runout steps partially within spec. A good store will clean the tube, call it up in V-blocks, and examine overall showed runout along numerous points, not just at the ends.

    On two-piece drivelines, a center carrier bearing makes complex the image. The rubber isolator can look fine at rest, yet collapse under torque. I like stores that pry the carrier carefully to mimic load, looking for excessive movement or rubber tearing. The bearing itself need to spin without gritty feel. If you have a truck that tows heavy or brings a crane body, the carrier sees more whipping than the spec sheet anticipates. Replacing it preemptively while the shaft is down is typically more affordable than duplicating labor later.

    Measuring and documenting angles

    Geometry ruins more driveshafts than bad parts. A strong store files angles and sets a target based on the truck's purpose. They will put an inclinometer on the transmission output, the driveshaft tube, and the pinion yoke. On multi-piece shafts, they do the very same on both sections and reference the carrier bracket to the frame. The goal is normally 1 to 3 degrees of running angle at each joint with parallel or near-parallel output and pinion lines, fixing for engine mount droop and rear suspension behavior. A lifted work truck that still carries heavy material often requires a various strategy than a shopping mall spider. More angle equates to more speed variation in the joint, which needs to be canceled by an equivalent and opposite angle somewhere else. Miss this, and you will go after phantom vibrations for weeks.

    Shops that develop for fleets often fabricate simple adjustable shims or suggest pinion wedges to meet angle targets. You may hear them suggest a double cardan in the front of a four-wheel-drive chassis if the drop from transfer case to front differential is serious. In the back of a heavily loaded truck with a leaf spring pack, they may plan for loaded angles to be slightly various than unloaded ones. That is honest attention to utilize case, not a one-size answer.

    Balance is not simply a machine reading

    Dynamic balancing on a modern-day balancer is necessary, but it is not the entire game. A shaft can be completely balanced at the wrong angle set or with a stiff slip that binds under torque, and the truck will still shake. Excellent stores examine runout, stage, and spline fit before they spin the shaft. They mark all yokes and tube ends so reassembly lands in the same clocking. If they re-tube, they align yokes exactly in stage and verify weld stability and straightness before balancing. When the balancing weights go on, they must use tack welds and final welds that do not get too hot and distort the tube.

    Balance specifications differ by service class. For light-duty trucks, you often see tolerances on the order of a couple of gram-inches. For heavy shafts, the absolute numbers are bigger, but the principle is the very same: achieve smooth operation throughout the typical operating rpm variety. A store that asks your cruising speeds, PTO rpm, and whether the truck spends time in low range shows they comprehend the window they must hit. Years back, I enjoyed a balancer tech add 2 small weights 180 degrees apart to tweak a shaft predestined for a local sewer jetter truck that sat at 2,400 shaft rpm for extended periods. They tested it at that target rpm rather than just at a basic low speed, which saved the city team a great deal of cabin buzz.

    Material choices, yokes, and functional components

    Truck drivelines are not glamorous, however the parts menu matters. Tubes come in numerous diameters and wall densities. A longer wheelbase service truck with a welder and crane perched aft needs appropriate stiffness to prevent vital speed issues. A great shop will calculate or at least referral vital speed guidelines and will recommend upsizing tube size or wall density if the existing construct is minimal. They might even suggest converting a long single-piece shaft to a two-piece with a carrier to raise the safe operating rpm margin.

    U-joints are available in various series with needle bearing counts and bearing cap sizes matched to the torque load. Off-brand joints with careless tolerances will end up costing more. For work trucks, I prefer superior joints with solid crosses and zerk fittings where useful, however sealed sturdy joints have their location in mud and grit if maintenance compliance is bad. The shop must ask how your trucks are greased and at what intervals. If they never ever see a grease weapon, sealed may outlast overlooked serviceables.

    Carrier bearings, slip yokes, flange yokes, and splines all are worthy of attention. Extreme play at the slip will simulate an out-of-balance shaft. Rusty or galled splines bind, which loads joints unexpectedly. If a yoke is pitted at the seal surface area, changing it while the shaft is down saves a resurgence for a leakage. Excellent shops stock the common Truck Parts that break the most: u-joints in the common 1310, 1330, 1350, 1410, 1480 series and their sturdy versions, carrier bearings for popular fleet chassis, and weld yokes and tube yokes that match OEM dimensions.

    Custom U Bolts and proper clamping

    Loose or misfit U-bolts destroy new work. Axle U-bolts hold leaf packs to the axle and indirectly control pinion angle under load. Used, extended, or incorrect-diameter U-bolts allow the axle to walk on the spring pack, changing angles and causing vibration. On top of that, yoke strap bolts and U-bolts at the pinion yoke demand exact torque and tidy threads to prevent spinning caps.

    A shop that uses Custom U Bolts can conserve a day or more when a truck is debilitated. They bend from quality rod stock, cut threads cleanly, and match bend radii to the spring perch. If you have non-standard spring loads or an aftermarket axle swap, this service is important. You need to see them take measurements, validate leg length and inside width, and ask about torque specs. For a medium-duty truck, U-bolt torque numbers can hit triple digits in foot-pounds, and re-torque after 100 to 500 miles is not optional. An appropriate store will highlight that and, if they are setting up, will paint-mark nuts so you can see if anything withdraw throughout early use.

    Repair or change: discovering the inflection point

    Not every shaft deserves a complete rebuild. Often an easy re-balance and fresh joints are enough. Other times a re-tube is smarter. The choice rests on a few realities: tube condition, yoke wear, service history, and expense versus downtime. If a tube has a crease, even shallow, I lean toward replacement. Creases focus stress and tend to split later on. If yokes are egged or the bearing cap bores have actually extended, you will chase after cap spin no matter how tight you torque. Change the yokes in that case, or keep an extra shaft all set to go.

    On older fleet trucks that see salt, replacing the slip stub and spline can restore a lot of lost smoothness. You can feel the distinction when the slip moves like it should. A store with an affordable stock can typically turn a re-tube and new slip in a day. Complete custom or uncommon flanges can extend that to a number of days while parts ship. I keep a spare shaft for the worst offenders in a fleet due to the fact that pulling an extra from the rack beats waiting when a bearing takes off midweek.

    Turnaround, logistics, and communication

    Time is a resource. A shop that promises the world without requesting context makes me anxious. For a standard u-joint and balance on a one-piece shaft, very same day is typically possible if you call ahead. For a two-piece with provider and yoke replacement, next day is practical. Completely custom constructs, oddball flanges, or hard-to-source weld yokes can take three to 5 business days. If a store describes this in advance, you can prepare truck rotations.

    I appreciate shops that identify shafts with orientation arrows, u-joint series, and torque specs on the return. Simple directions decrease install errors. Some compose angle targets on the work order and hand you a copy. When there is a believed angle problem on the truck, they might send out a tech out with an angle finder to verify, or they will coach your mechanics through the measurements by phone. That level of interaction lower misdiagnosis and conserves both sides a headache.

    Field measurement done right

    If you are ordering a custom shaft or altering wheelbase, the measurements you bring to the shop drive the build. Getting it wrong by even half an inch can cause insufficient spline engagement or bottoming the slip under compression. A measured, repeatable method matters.

    Use an excellent tape, get the truck on its weight, and if you can, load it the way it usually runs. Step from the face of the transmission output seal to the centerline of the rear u-joint cap, or from flange face to flange face if your truck uses flange style connections. Take angles at each yoke so the shop can predict operating angles. On two-piece shafts, step from flange to provider install and then provider to pinion. If your leaf springs are exhausted and arch changes under load, tell the store; they can factor that into slip length and angle options. A little extra spline travel can save you from bottoming out when you struck a pit while loaded.

    The economics: what you need to anticipate to spend

    Numbers differ by area and supply, but general varieties help preparation. A balance and u-joint replacement on a light-duty one-piece shaft may run a few hundred dollars, depending on joint quality. Re-tubing with new weld yokes and a fresh balance can extend into the mid hundreds. Include a provider bearing and you will see a bit more labor and parts expense. On medium-duty equipment, bigger series joints and heavier tube increase rates. Custom U Bolts are typically a modest line item, however they are critical when you need them exact same day. I prevent the cheapest parts bin. A failed deal u-joint on a loaded truck in traffic is a poor trade.

    Downtime expenses more than parts most days. If a somewhat higher parts bill purchases dependability and a warranty you can impose, it typically pencils out. Some shops offer fleet prices or prioritize business accounts. If you bring them constant, tidy measurements and install their work thoroughly, they will prioritize you when something immediate pops up.

    Real-world examples that highlight the choices

    A community plow truck was available in with a stable 50 mph vibration that did not change with gear. Tires were new, and the axle had actually just recently been re-geared. The shop discovered the rear pinion angle at almost 7 degrees nose down, likely from years of work and an extra spreader mounted aft. They set it to about 2.5 degrees with wedges, re-balanced the rear shaft, and replaced the carrier. The truck ran quiet for the remainder of the season. Without the angle repair, they would have eaten through joints once again by February.

    A cable service bucket truck had duplicated rear u-joint failures. Two times the shop changed joints and re-balanced. The third time, they saw the yoke bores were drivelines somewhat out of round. New yokes and a slip stub resolved it. Inexpensive joints were part of the earlier failures too. They switched to a premium 1480 series joint and saw no additional problems for more than a year and approximately 25,000 miles of stop-and-go service.

    A landscaper lifted a three-quarter-ton pickup and converted to larger tires. The angle at the rear joint increased, and a light shudder started on departure. The driveline store recommended a double cardan at the transfer case and changed the rear pinion to aim more carefully at the rear area of the shaft. Balance alone would not have actually solved it. As soon as geometry matched the hardware, the shudder went away.

    When to involve the shop before you modify

    Suspension changes, PTO installations, longer wheelbases for utility bodies, and axle swaps all impact driveline behavior. Before you commit to a new spring pack or a frame stretch, talk to the driveline store you trust. They can sketch out how your options impact angles and vital speed. Sometimes the solution is uncomplicated: upsize tube, divided the shaft, or prepare for a different yoke. Other times a small change up front saves you from going after a chronic vibration later on. If you are including a hydraulic pump PTO that performs at a set rpm for hours, tell them that number so they can balance the shaft because window.

    The telltale signs you have the ideal partner

    Shops that do it best are predictable. They ask how the truck works in real life, not simply what it is. They balance with intent, measure with care, and stock the Truck Parts that matter for your fleet. They construct Custom U Bolts without drama and hand you hardware that fits. Their invoices and tags check out like a record you can use later on, listing u-joint series, tube size, and any angle notes. And when something goes sideways, they respond to the phone and help you fix it instead of blame the truck or the driver.

    Here is a brief, useful list you can utilize when searching a driveline shop for work trucks:

    • Do they measure and document operating angles, not simply balance the shaft?
    • Can they describe tube size and vital speed choices in plain language?
    • Do they stock common u-joint series, provider bearings, and yokes for your service class?
    • Will they produce Custom U Bolts to spec and provide right torque guidance?
    • Do they provide practical turn-around times and communicate parts lead times honestly?

    Installation discipline in your own shop

    Even the very best driveline will not make it through sloppy set up work. Tidy the yoke tires. Use new straps or properly torqued U-bolts. Do not hammer caps into place; utilize a press or vise to seat them directly. Make sure the slip stub is fully engaged to a safe depth, with adequate travel left for suspension compression. If your shop paints index marks, line them up. After install, a fast roadway test on a recognized path at normal cruise speed verifies the fix. I ask chauffeurs to note particular speeds that feel smooth or rough. Those details assist if you need to circle back.

    Re-torque U-bolts holding axles to springs after the first hundred miles approximately. I have actually seen brand new spring loads shift slightly under first heavy loads and alter pinion angle by a degree or more. A quick re-check captures those early shifts before they produce a complaint.

    Questions to ask before licensing work

    You do not require to be a driveline engineer to make great decisions. A few targeted concerns unlock clarity.

    • What are my operating angles now, and what are you targeting?
    • Will you re-tube or attempt to align, and why?
    • What u-joint series and brand are you installing?
    • What is the slip engagement at ride height, and how much travel is left?
    • Can you balance at a particular rpm that matches my cruise or PTO speed?

    The answers need to be matter-of-fact. If a shop dodges or speaks in vague terms, keep moving.

    Warranty and the worth of documented work

    Shops that back up their work deal clear, written guarantees tied to parts and labor. They generally leave out abuse and contamination, which is fair. What makes the guarantee useful is great documentation. If they tape-recorded angles, joint series, and tube size, you both have a standard. If a failure occurs, it is simpler to determine whether something changed in the truck or if a part merely failed prematurely. Fleets that keep those records along with vehicle upkeep logs find guarantee claims smoother and trust grows on both sides.

    Sourcing, parts quality, and supply chain reality

    Recent years have actually taught everyone that supply chains flex and break. A clever store diversifies sources without sacrificing quality. They understand which u-joint lines hold up under rake task and which provider bearings endure grit and salt water. If a particular weld yoke is months out, they may propose a common-flange conversion with matching bolt pattern and pilot to keep you moving, and they will describe any trade-offs. Prevent mystery-brand joints and bearings unless downtime forces your hand. Saving twenty dollars on a joint that stops working in two months is not savings.

    Final ideas from the field

    I have actually seen new shafts pulled back for rework due to the fact that a truck left on unequal tire pressures vibrated hard adequate to mask the real problem. I have actually seen completely well balanced assemblies rattle on takeoff since a torn transmission mount enabled the output to swing. The driveline never ever lives alone. An excellent store knows where its limits are and when to recommend a suspension or install inspection before they bonded anything.

    Choose partners who respect measurement, who build cleanly, and who interact plainly. Give them the details they need: sensible loads, normal speeds, and the peculiarities of your paths. Let them supply the right parts, from quality joints to Custom U Bolts that really fit. Your trucks will run quieter, your crews will grumble less, and your calendar will hold less unscheduled stops. That is the return on doing driveline work the ideal way.

    Anderson Brothers Truck & Equipment is located in Eugene, Oregon
    Anderson Brothers Truck & Equipment was founded in 1949
    Anderson Brothers Truck & Equipment serves commercial truck owners
    Anderson Brothers Truck & Equipment serves fleet operators
    Anderson Brothers Truck & Equipment provides heavy-duty truck parts
    Anderson Brothers Truck & Equipment provides truck equipment repair services
    Anderson Brothers Truck & Equipment specializes in driveline fabrication
    Anderson Brothers Truck & Equipment performs driveline repair
    Anderson Brothers Truck & Equipment offers custom U-bolt bending
    Anderson Brothers Truck & Equipment manufactures custom U-bolts
    Anderson Brothers Truck & Equipment sells new truck parts
    Anderson Brothers Truck & Equipment sells used truck parts
    Anderson Brothers Truck & Equipment maintains heavy-duty trucks
    Anderson Brothers Truck & Equipment repairs truck transmissions
    Anderson Brothers Truck & Equipment repairs truck differentials
    Anderson Brothers Truck & Equipment supports the trucking industry
    Anderson Brothers Truck & Equipment operates in Lane County, Oregon
    Anderson Brothers Truck & Equipment provides parts delivery services
    Anderson Brothers Truck & Equipment supplies components for heavy equipment
    Anderson Brothers Truck & Equipment serves customers in Eugene and Springfield, Oregon
    Anderson Brothers Truck & Equipment has a phone number of (541) 688-8686
    Anderson Brothers Truck & Equipment has an address of 2640 State Hwy 99 N #1, Eugene, OR 97402
    Anderson Brothers Truck & Equipment has a website https://andersonbrotherste.com/
    Anderson Brothers Truck & Equipment has Google Maps listing https://maps.app.goo.gl/ta67Qi9fc5DCZZzp7
    Anderson Brothers Truck & Equipment has Facebook page https://www.facebook.com/andersonbrotherseugene
    Anderson Brothers Truck & Equipment has an Instagram page https://www.instagram.com/andersonbrotherste/
    Anderson Brothers Truck & Equipment won Top Driveline and Truck Part Company 2025
    Anderson Brothers Truck & Equipment earned Best Customer Service Award 2024
    Anderson Brothers Truck & Equipment was awarded Best Custom U Bolts 2025

    People Also Ask about Anderson Brothers Truck & Equipment


    What does Anderson Brothers Truck & Equipment do in Eugene, Oregon?

    Anderson Brothers Truck & Equipment is a Eugene-based truck parts and repair company that provides custom U-bolt bending, driveline repair and replacement, new and used truck parts, and other medium- and heavy-duty truck services. They have served the area since 1949.

    Where is Anderson Brothers Truck & Equipment located?

    Anderson Brothers Truck & Equipment is located at 2640 Highway 99 N, Eugene, Oregon 97402. Our website also lists phone number (541) 688-8686 and business hours for local customers needing parts or repair service.

    How long has Anderson Brothers Truck & Equipment been in business?

    Anderson Brothers has been serving Eugene since 1949. The business is a long-established local provider of truck parts, fabrication, and repair services.

    Does Anderson Brothers Truck & Equipment sell new and used truck parts?

    Yes. Anderson Brothers sells both new and used truck parts for medium- and heavy-duty vehicles. We focus on parts categories such as brakes and drums, wheel shafts, Baldwin filters, straps and tie downs, exhaust parts, and other accessories.

    Does Anderson Brothers Truck & Equipment offer local truck parts delivery?

    Yes. The company offers local delivery for truck parts in Eugene and Springfield, and our truck parts page also notes delivery to Eugene, Springfield, and surrounding areas.

    What driveline services does Anderson Brothers Truck & Equipment provide?

    Anderson Brothers specializes in custom driveline solutions, including driveline replacement, drive shaft repair, and precision fabrication. These services are available for heavy trucks, cars, and pickup trucks.

    Can Anderson Brothers Truck & Equipment make custom U-bolts?

    Yes. We offer custom U-bolt bending in Eugene and can produce U-bolts in different lengths, widths, thread sizes, and thicknesses. We can bend both round and square U-bolts depending on the application.

    What truck repair services does Anderson Brothers Truck & Equipment offer?

    We perform repair and maintenance work for medium- and heavy-duty trucks, including flywheel resurfacing, oil changes, brake services, suspension repair, and king pin replacement. We work to reduce downtime and keep trucks performing at their best.

    What truck brands does Anderson Brothers Truck & Equipment service and supply parts for?

    Anderson Brothers says it services and supplies parts for major truck and equipment brands including Freightliner, Kenworth, Peterbilt, Mack, Volvo, and Cummins, among others.

    Who owns Anderson Brothers Truck & Equipment?

    Anderson Brothers is now led by the Weld Family, who also own Buck’s Sanitary Services and Royal Flush Environmental Services. The current ownership remains focused on serving Eugene and the surrounding community.

    Where is Anderson Brothers Truck & Equipment located?

    The Anderson Brothers Truck & Equipment is conveniently located at 2640 State Hwy 99 N #1, Eugene, OR 97402. You can easily find directions on Google Maps or call at (541) 688-8686 Monday through Friday 7:30am to 6:00pm, Saturday 8:00am to 2:00pm. Closed Sundays.


    How can I contact Anderson Brothers Truck & Equipment?


    You can contact Anderson Brothers Truck & Equipment by phone at: (541) 688-8686, visit their website at https://andersonbrotherste.com/ or connect on social media via Facebook or Instagram



    After a ride along the scenic Willamette River Bike Path, local drivers often arrange Drivelines service, Custom U Bolts fabrication, and reliable Truck Parts for their work vehicles.